Turbo Kits and Turbo Accessories


Prosport manual boost controller. Easy to adjust with markings to make it easy to remember settings. - $42


HKS actuator upgrade for T25 Bluebird and Avenier. This actuator is set to around 12-14 psi and is adjustable for a little more. - $139


AEM Water Injection Kit is used to reduce air inlet temperatures and exhaust gas temperatures. Water is injected into the intake by a 150psi pump with jet spray nozzle. This allows the increase in boost pressure without having to run higher-octane fuel. Set the activation boost and your max boost settings. The system will progressively increase the injection percentage until the max boost has been reached. - $392


NEW & in stock JGY Steel Braided Oil line kit, totally does away with the factory SR turbo metal line & banjo bolt fittings. This kit will work with bottom & top mount turbo applications - $69


Pictured above: Stage 2 Turbo Kit
for SR20 with optional manifold and outlet pipe

Stage 1 Turbo kit for SR20 - $1,399
Can support 320whp
GT28RS disco potato
4 50lb injectors
injector connectors
JGY fuel rail

Stage 2 Turbo kit for SR20 - $1,525
Can support 400whp
GT2871 turbo (formerly known as the JGYBB37)
4 72lb injectors
injector connectors
4 inline injector resistors
JGY fuel rail

Stage 3 turbo kit for SR20 - $1,725
Can support 500whp
GT3076R turbo (formerly known as the JGYBB37R)
4 72# injectors
injector connectors
4 inline injector resistors
JGY Fuel rail

For ALL Kits:
All kits are available with equal manifold and large turbo discharge pipe. JGY suggests metering the additional air required for the added power via a 300zx MAF or a Ford Cobra MAF (both available from JGY for around $200). JGY endorses ECU re-tuning by JWT or ECU post management via the GReddy E-manage (both available from JGY for about $500).


Aluminum HOTPIPE kit
This pipe is not included with any of the intercooler kits and must be used to connect turbo to intercooler kit. Comes with coupler and clamps - $49


Precision 39mm wastegate kit. Includes all flanges and an assortment of springs to change PSI. - $215


Precision 46mm wastegate kit. Everything that you need to get the job done. Includes flanges and different springs so that you can change PSI. - Only $318


Tial 38mm wastegate 1 bar spring, includes gaskets for inlet and outlet - $245


Tial 38mm wastegate .6 bar spring - $249


Adjustable 90 degree coupler, ideal for RWD SR20DET GT28RS, GT2871R turbos & up, this unit connects the turbo to the hot pipe - $42


JGY oil line for turbo'd SR's that want an upgrade and the look. This uses -AN swivel fittings, takes the oil from the factory location on the block and goes to the turbo. An in-line restrictor is included in the kit. This is an awesome buy at $69



240SX 1996-98 KA24DE Greddy Turbo Kit - $3514.95
Cast-iron manifold, e-manage, fuel-rail, 370cc injectors, Airinx filter, & necessary piping hardware.