SE-R / G20 / NX Exhaust

JGY NX2000 2.5 inch catback exhaust with Magnaflow muffler
JGY NX2000 exhaust
JGY NX2000 exhaust
JGY NX2000 2.5inch cat back exhaust, all mandrel bent, includes nice Magnaflow muffler with 3.5inch double walled tip - $320.00 for Normal, $110 extra for Stainless, $100 for Resonator. We also have this exhaust in 3inch for $415


JGY B14 3 inch bolt-on catback exhaust - no muffler
Customer gets to use/choose his/her own muffler - $299
Add $80 for resonator
Add $100 for stainless
Pictured above is with resonator





B13 - '91 to '94 Sentra JGY Catback Exhaust, 3 inch, mandrel bends, Magnaflow straight through muffler, fits OEM location, excellent sound - $399
Add $80 for extra resonator behind cat;
Add $100 for all stainless


Flowmaster High Spun cat, with 3 inch inlet and outlet, suitable for up to 5.9L of motors - $79

JGY will weld flanges for $15, each flange is $15, so that's $45

Pictured above on the left is a welded one to suit the OEM location, and on the right is the $79 one



HKS high power 2.5" stainless steel muffler - Only $239


Topspeed Header for SR20DE, SR16VE and SR20VE has large primaries and excellent fit and finish, now with 2.5 inch secondary!, for every year car equipped with an SR FWD motor, including G20s, comes with gaskets, bolts, and all the spots for EGR and O2 sensors, even plugs to block off the sensors if not using, also has spot for rear O2 sensor for newer cars - $289


High flow 3" Catalytic Converter, welding required - $79


Finally, Greddy has re-released an exhaust for the B14 2 door 200sx. We love our exhausts that we make and sell, but there is just something about the quality of the Greddy's and its understated sound. 60mm piping is used. If you want that show quality look and sound, this is the one. List is $599, Our price - $call

Here is what Greddy says: "It wasn't easy to improve on the popular Greddy SP system. But through customer feedback from over 10 years of use and testing, Greddy redesigned the SP as a full stainless steel cat-back exhaust system that is similarly priced to the original SP system. The new SP2 features a 304 stainless steel muffler canister with extra strong 430 SS end caps that feature a deep, high polish. Large, high volume mufflers provide maximum flow with a deep, pleasing tone and are especially effective when used on vehicles with aftermarket turbocharger systems. The unique outer curled oval tip (115 x 110mm dia.) is embossed with the famous Greddy logo. Employing state-of-the-art robotic seam welding, the single wall canisters feature increased rigidity for maximum durability and life. With over 35 types of internal perforated tubes, each SP2 application is specifically tuned for the best combination of sound and performance. The new SP2 also features thick walled (1.5mm); polished 304 stainless steel mandrel bent piping for better resonance and vibration control and enhanced corrosion resistance and durability. New lightweight, flared and stamped stainless steel flanges are also used to provide improved sealing characteristics."


Magnaflow 2.5" round muffler
with 4" tip - $139
Magnaflow 3" round muffler
with 4" tip - $139


90° Mini Cat
For tight fitting spots - it threads into where the O2 sensor would go, and then the O2 sensor threads into it. This O2 cel fix has a miniature catalytic converter built inside and will help get rid of that annoying check engine light you get after modifying your exhaust or removing your catalytic converters, and sometimes even when installing a high flow catalytic converter. Great for use when removing the upper cats installed near the head, yet keeping your rear cats. - $44


The Prosport Mini Cat
This O2 cel fix actually has a miniature catalytic converter built inside and will help get rid of that annoying check engine light you get after modifying your exhaust or removing your catalytic converters, and sometimes even when installing a high flow catalytic converter. Great for use when removing the upper cats installed near the head, yet keeping your rear cats. This threads into where the O2 sensor would go, and then the O2 sensor threads into it easily - $44




JGY B13 2.5 inch catback exhaust - $329 for the system
Now ships with muffler pictured below
Add $80 extra for resonator (pictured above)
Add $100 for stainless


Fits 1991 to 1994 Sentras E, XE, SE, and Se-r
Utilizes a Magnaflow Muffler
The most popular version is non-stainless with resonator
Also available in 2.25 inch at the same price


JGY B14 2.5 inch catback exhaust - $299 for the system
Add $80 extra for resonator (mid muffler)
Add $100 extra for stainless

Fits 1995 to 1998 200sx and Se-r's
All mandrel bent, includes Magnaflow muffler
(The most popular ordered combo is resonated NON-stainless for $379)


P10 G20 exhaust bolt-on tubing kit, 3inch, contains all items needed with the exception of the muffler - $279, or $364 for stainless


JGY P11 G20 catback exhaust, 2.5 inch piping, Magnaflow stainless twin tip muffler, includes gaskets and hardware - $430, add $70 more for pictured resonator; just $370 for same exhaust, but with single exit muffler


Photo of exhaust installed


Another view of the exhaust installed


3 bolt J pipe outlet gasket. Fiber with metal ring for superb seal - $7


HKS Carbon Fiber TI muffler, with 75mm inlet and 120mm outlet, comes with hangers too! At $299, it’s an excellent visual addition to a JGY exhaust


3" mandrel catback with straight thru muffler, made specifically for '91 to '94 B13s, and for '95 to '98 B14s - This is a 2 piece design with a swivel flange at the rear suspension joint to allow for adjustment during installation, all mufflers are Magnaflow - $399

Available in stainless - $499



Above is a video of our B13 with our 3inch system with resonator, resonator is $79 extra

2.5" mandrel catbacks are $299 and are great for those NA dudes out there



G20 P10 Also available for the same prices, yes, the P10

3" mandrel B14 catback with straight thru muffler - This is a 2 piece design with a swivel flange at the rear suspension joint to allow for adjustment during installation, all mufflers are magnaflow stainless mufflers - $399
Available in stainless - $499


Add $80 for Resonator


3" testpipe (cat delete/cat replacement) exhaust piece, stainless steel, fits B13's, B14's, B15's, P10's and P11's; flanges are the same dimension as the factory cat - $69


JGY Test pipe 2.5 inch - $40
JGY Test Pipe 3 inch - $50